Thiết Bị Mạng Switch 48 port 101001000BASE-T + 4 port 1001000BASE-X SFP PLANET GS-4210-48T4S

8.270.000 

    – 48 cổng RJ45 10/100/1000BASE-T + 4 slot 100/1000BASE-X mini-GBIC/SFP.
    – Tiêu chuẩn IEEE 802.3, IEEE 802.3u, IEEE 802.3ab…
    – Các tính chất Store-and-Forward mode với các tốc độ dây và forwarding.
    – Hỗ trợ 8K cho các địa chỉ MAC.
    – Hỗ trợ 9K cho gói Jumbo.
    – Hỗ trợ chức năng Auto-MDI/MDI-X.
    – Hỗ trợ giao thức CSMA/CD.
    – Thiết kế theo chuẩn A: FCC, CE.
Danh mục: Thẻ: ,

Mô tả

Physical Port

–       24 port 10/100/1000BASE-T Gigabit RJ45 copper.

–       2 100/1000BASE-X mini-GBIC/SFP slots.

–       RJ45 console interface for switch basic management and setup.

–       Reset button for system factory default.

Switching

–       Hardware based 10/100Mbps, half / full duplex and 1000Mbps full duplex mode, flow control and auto-negotiation and auto MDI/MDI-X

–       Features Store-and-Forward mode with wire-speed filtering and forwarding rates.

–       IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation.

–       9K Jumbo frame.

–       Automatic address learning and address aging.

–       Supports CSMA/CD protocol.

Layer 2 Features

–       Supports VLAN

–       IEEE 802.1Q tagged VLAN.

–       Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad).

–       Protocol VLAN.

–       Voice VLAN.

–       Private VLAN (Protected port).

–       Management VLAN.

–       GVRP.

–       Supports Spanning Tree Protocol

–       STP (Spanning Tree Protocol).

–       RSTP (Rapid Spanning Tree Protocol).

–       MSTP (Multiple Spanning Tree Protocol).

–       STP BPDU Guard, BPDU Filtering and BPDU Forwarding.

–       Supports Link Aggregation

–       IEEE 802.3ad Link Aggregation Control Protocol (LACP).

–       Cisco ether-channel (Static Trunk).

–       Maximum 8 trunk groups, up to 8 ports per trunk group.

–       Provides port mirror (many-to-1).

–       Loop protection to avoid broadcast loops.

Quality of Service

–       Ingress / Egress Rate Limit per port bandwidth control.

–       Traffic classification.

–       IEEE 802.1p CoS.

–       DSCP / IP Precedence of IPv4 / IPv6 packets.

–       Strict priority and Weighted Round Robin (WRR) CoS policies.

Multicast

–       Supports IPv4 IGMP snooping v2 and v3.

–       Supports IPv6 MLD snooping v1, v2.

–       IGMP querier mode support.

–       IGMP snooping port filtering.

–       MLD snooping port filtering.

Security

–       Storm Control support: Broadcast/ Unknown-Unicast/ Unknown-Multicast.

–       Authentication

–       IEEE 802.1X port-based network access authentication.

–       Built-in RADIUS client to co-operate with the RADIUS servers.

–       DHCP Option 82.

–       RADIUS / TACACS+ authentication.

–       Access Control List

–       IPv4 / IPv6 IP-based ACL.

–       IPv4 / IPv6 IP-based ACE.

–       MAC-based ACL.

–       MAC-based ACE.

–       MAC Security

–       Static MAC.

–       MAC Filtering.

–       Port security for source MAC address entries filtering.

–       DHCP snooping to filter distrusted DHCP messages.

–       Dynamic ARP inspection discards ARP packets with invalid MAC address to IP address binding.

–       IP source guard prevents IP spoofing attacks.

–       DoS attack prevention.

Management

–       IPv4 and IPv6 dual stack management.

–       Switch Management Interface.

–       Local Command Line Interface.

–       IPv4 / IPv6 Web switch management.

–       Telnet Command Line Interface.

–       SNMP v1, v2c and v3.

–       HTTPs secure access.

–       Built-in Trivial File Transfer Protocol (TFTP) client.

–       Static and DHCP for IP address assignment.

–       System Maintenance

–       SNTP Network Time Protocol.

–       Cable diagnostics.

–       Link Layer Discovery Protocol (LLDP) Protocol and LLDP-MED.

–       SNMP trap for interface Link Up and Link Down notification.

–       Event message logging to remote Syslog server.

–       Four RMON groups (history, statistics, alarms and events).

–       PLANET Smart Discovery Utility.

Physical Port

–       24 port 10/100/1000BASE-T Gigabit RJ45 copper.

–       2 100/1000BASE-X mini-GBIC/SFP slots.

–       RJ45 console interface for switch basic management and setup.

–       Reset button for system factory default.

Switching

–       Hardware based 10/100Mbps, half / full duplex and 1000Mbps full duplex mode, flow control and auto-negotiation and auto MDI/MDI-X

–       Features Store-and-Forward mode with wire-speed filtering and forwarding rates.

–       IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation.

–       9K Jumbo frame.

–       Automatic address learning and address aging.

–       Supports CSMA/CD protocol.

Layer 2 Features

–       Supports VLAN

–       IEEE 802.1Q tagged VLAN.

–       Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad).

–       Protocol VLAN.

–       Voice VLAN.

–       Private VLAN (Protected port).

–       Management VLAN.

–       GVRP.

–       Supports Spanning Tree Protocol

–       STP (Spanning Tree Protocol).

–       RSTP (Rapid Spanning Tree Protocol).

–       MSTP (Multiple Spanning Tree Protocol).

–       STP BPDU Guard, BPDU Filtering and BPDU Forwarding.

–       Supports Link Aggregation

–       IEEE 802.3ad Link Aggregation Control Protocol (LACP).

–       Cisco ether-channel (Static Trunk).

–       Maximum 8 trunk groups, up to 8 ports per trunk group.

–       Provides port mirror (many-to-1).

–       Loop protection to avoid broadcast loops.

Quality of Service

–       Ingress / Egress Rate Limit per port bandwidth control.

–       Traffic classification.

–       IEEE 802.1p CoS.

–       DSCP / IP Precedence of IPv4 / IPv6 packets.

–       Strict priority and Weighted Round Robin (WRR) CoS policies.

Multicast

–       Supports IPv4 IGMP snooping v2 and v3.

–       Supports IPv6 MLD snooping v1, v2.

–       IGMP querier mode support.

–       IGMP snooping port filtering.

–       MLD snooping port filtering.

Security

–       Storm Control support: Broadcast/ Unknown-Unicast/ Unknown-Multicast.

–       Authentication

–       IEEE 802.1X port-based network access authentication.

–       Built-in RADIUS client to co-operate with the RADIUS servers.

–       DHCP Option 82.

–       RADIUS / TACACS+ authentication.

–       Access Control List

–       IPv4 / IPv6 IP-based ACL.

–       IPv4 / IPv6 IP-based ACE.

–       MAC-based ACL.

–       MAC-based ACE.

–       MAC Security

–       Static MAC.

–       MAC Filtering.

–       Port security for source MAC address entries filtering.

–       DHCP snooping to filter distrusted DHCP messages.

–       Dynamic ARP inspection discards ARP packets with invalid MAC address to IP address binding.

–       IP source guard prevents IP spoofing attacks.

–       DoS attack prevention.

Management

–       IPv4 and IPv6 dual stack management.

–       Switch Management Interface.

–       Local Command Line Interface.

–       IPv4 / IPv6 Web switch management.

–       Telnet Command Line Interface.

–       SNMP v1, v2c and v3.

–       HTTPs secure access.

–       Built-in Trivial File Transfer Protocol (TFTP) client.

–       Static and DHCP for IP address assignment.

–       System Maintenance

–       SNTP Network Time Protocol.

–       Cable diagnostics.

–       Link Layer Discovery Protocol (LLDP) Protocol and LLDP-MED.

–       SNMP trap for interface Link Up and Link Down notification.

–       Event message logging to remote Syslog server.

–       Four RMON groups (history, statistics, alarms and events).

–       PLANET Smart Discovery Utility.