Mô tả

Nguồn lưu điện UPS ARES AR-MP10KRT (Bộ)

– Công suất: 10KVA/10kW

– Điện áp nguồn vào: 110 ~ 286Vac (đầy tải)

– Điện áp nguồn ra: 220V

– Tần số: 50/60Hz (tự động nhận)

– Dạng sóng: Sóng sine chuẩn

– Cổng kết nối: USB/RS232

– Phần mềm điều khiển và giám sát hệ thống (miễn phí)

– Kết nối với tải: Terminal block

*) Trọn bộ bao gồm: UPS AR-MP10KRT + Tủ ắc quy gồm 20 ắc quy axit chì 12V9AH.

Thông số kỹ thuật

Model	AR-MP10KRT
Capacity	10000VA/10000W
INPUT
Nominal votage	208/220/230/240Vac
Input voltage range	110-286Vac
Frequency range	40-70Hz (50/60Hz Auto-Sensing)
Power factor	≥0.99
Bypass voltage range	240V: +15% (Optional+10%) Min.voltage:-45% (Optional-20%,-30%)
OUTPUT
Output voltage	208/220/230/240Vac
Power factor	0.9
Voltage regulation	±1%
Output frequency	Line Mode: ±1%/±2%/±4%/±5%/±10% of the rated frequency (Optional) Bat. Mode: (50/60±0.1%)Hz
Crest factor	3:1
Harmonic distortion (THDv)	≤2% Linear load ≤5% Non linear load
Transfer time	AC mode to Bat.Mode: 0ms Inverter to Bypass: 0ms (Typical)
Output wave form	Pure Sinewave
Overload	Line Mode: Load≤110% last 60 min; ≤125% last 10 min; ≤150% last 1 min; >150% turn to bypass mode immediately Bypass Mode: 63A (Breaker)
Efficiency	94%
BATTERY
Battery voltage	±96/±108/±120Vdc (Adjustable)
Capacity (standard unit)	9Ah/12V (7Ah/12V optional)
Typical recharging time	6-8 hours (to 90% of full capacity)
INDICATORS
LED display	Line mode, Bat.mode, ECO mode, Bypass mode, Battery low voltage, Overload & UPS fault
LCD display	Input voltage, Input frequency, Output voltage, Output frequency, Load percentage, Battery voltage, Inner temperature& Remaining battery backup time
ALARM
Battery mode	Beeping every 4 seconds
Battery low	Beeping every second
Overload	Beeping twice every second
Fault	Continously beeping
PHYSICAL
Dimension (W x D×H)	440 x 625 x 86.5 mm
Weight	18 kg
ENVIRONMENT
Operating temperature	0℃~40℃
Storage temperature	-25℃~55℃
Humidity range	20~95%RH @ 0~40℃ (Non condensing)
Altitude	<1500m,derating required when>1500m
Noise level