Mô tả
| MR52 Specifications | |
| Radios | Environment |
| 2.4 GHz 802.11b/g/n client access radio | Operating temperature: 32 °F to 104 °F (0 °C to 40 °C) |
| 5 GHz 802.11a/n/ac client access radio | Humidity: 5 to 95% non-condensing |
| 2.4 GHz & 5 GHz dual-band WIDS/WIPS, spectrum analysis, & location analytics radio | Physical Dimensions |
| 2.4 GHz Bluetooth Low Energy (BLE) radio with Beacon and BLE scanning support | 10.56” x 6.38” x 1.58” (268.2 mm x 162.0 mm x 38.8 mm), not including deskmount feet or mount plate |
| Concurrent operation of all four radios | Weight: 28.9 oz (820g) |
| Supported frequency bands (country-specific restrictions apply): 2.412-2.484 GHz 5.150-5.250 GHz (UNII-1) 5.250-5.350 GHZ (UNII-2) 5.470-5.600, 5.660-5.725 GHz (UNII-2e) 5.725 -5.825 GHz (UNII-3) |
Security |
| Atenna | Integrated Layer 7 firewall with mobile device policy management |
| Integrated omni-directional antennas (5.5 dBi gain @ 2.4 GHz, 6.2 dBi gain @ 5 GHz) | Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal |
| Individual antenna elements for each radio | Flexible guest access with device isolation |
| 802.11ac Wave 2 and 802.11n Capabilities | VLAN tagging (802.1q) and tunneling with IPsec VPN |
| 4 x 4 multiple input, multiple output (MIMO) with four spatial streams | PCI compliance reporting |
| SU-MIMO and MU-MIMO support | WEP, WPA, WPA2-PSK, WPA2-Enterprise with 802.1X |
| Maximal ratio combining (MRC) & beamforming | EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM |
| 20 and 40 MHz channels (802.11n); 20, 40, 80, and 160 MHz channels (802.11ac) | TKIP and AES encryption |
| Up to 256-QAM on both 2.4 GHz & 5 GHz bands | Enterprise Mobility Management (EMM) & Mobile Device Management (MDM) integration |
| Packet aggregation | Cisco ISE integration for Guest access and BYOD Posturing |
| Power | Quality of Service |
| Power over Ethernet: 37 – 57 V (802.3at required; functionality-restricted 802.3af mode supported) | Advanced Power Save (U-APSD) |
| Alternative 12 V DC input | WMM Access Categories with DSCP and 802.1p support |
| Power consumption: 21W max (802.3at) | Layer 7 application traffic identification and shaping |
| Power over Ethernet injector and DC adapter sold separately | Mobility |
| Interfaces | PMK, OKC, & 802.11r for fast Layer 2 roaming |
| 2x 10/100/1000 BASE-T Ethernet (RJ45) | Distributed or centralized layer 3 roaming |
| 1x DC power connector (5.5 mm x 2.5 mm, center positive) | Analytics |
| Mounting | Embedded location analytics reporting and device tracking |
| All standard mounting hardware included | Global L7 traffic analytics reporting per network, per device, & per application |
| Desktop, ceiling, and wall mount capable | Warranty |
| Ceiling tile rail (9/16, 15/16 or 1 ½” flush or recessed rails), assorted cable junction boxes | Lifetime hardware warranty with advanced replacement included |
| Bubble level on mounting cradle for accurate horizontal wall mounting | Ordering Information |
| Physical Security | MR52-HW: Meraki MR52 Cloud Managed 802.11ac AP |
| Two security screw options (included) | MA-PWR-30W-XX: Meraki AC Adapter for MR Series (XX = US/EU/UK/AU) |
| Kensington lock hard point | MA-INJ-4-XX: Meraki 802.3at Power over Ethernet Injector (XX = US/EU/UK/AU) |
| Concealed mount plate with anti-tamper cable bay | Note: Meraki access point license required. |
